CE EN 845-1 certified
Patented system
Made in Belgium
100+
years of combined team experience in façade supports
145+
projects delivered since our start in 2025.

The MFX system

Masonry support for every façade

MFX masonry supports ensure a controlled transfer of façade loads above movement joints such as windows, doors and gates. The range covers a wide variety of building applications in Belgium, and is weld-free in most situations.
  • Residential and apartment buildings
  • Large window and door openings
  • Horizontal movement joints
  • Façades with limited to very large cavity widths
  • Renovation projects with staggered brickwork
Selection guide

Which MFX type do you need?

Find your situation and see which masonry support fits.
Your situation
MFX type
Horizontal movement joint, façade without support batten
MFX-S
Large window opening or overhang, extra load capacity needed
MFX-D
Movement joint at window sill height, or staggered brickwork
MFX-R
No cavity behind the angle, e.g. with screens or roller shutters
MFX-I
Small cavity, e.g. with a timber inner leaf
MFX-O
Visible soldier course in natural stone
MFX + roll course brackets

A solution for every situation:

MFX-S

This weld-free masonry support type is suitable for situations without a support batten. It is often used at horizontal movement joints.
MFX-S geveldrager

MFX-D

This weld-free masonry support type is ideal for situations with a support batten. Think of large window openings or cantilevers where extra support is required.
MFX-D geveldrager

MFX-R

For façades with stepped brickwork, or when the horizontal movement joint is located at the bottom of the window frame, the MFX-R masonry support is the perfect solution.
MFX-R geveldrager

MFX-I

When there is no cavity behind the angle profile, as is the case with screens, the welded masonry support MFX-I is the right choice.
MFX-I geveldrager

MFX-O

This welded masonry support is used when there is a small cavity, caused for example by timber inner leaves.
MFX-O geveldrager

MFX-stirrups

Masonry supports can be combined with stirrups—ideal when the architect or designer wants to keep a visible brick soldier course.
2D-MFX-Rollaag

Delivered prefab, ready to install

Every MFX masonry support arrives on site prefabricated and precisely assembled. No welding is needed on site.

Download the installation advice
Prefabricated MFX masonry support, delivered ready to install
Why Atko MFX

Why do construction professionals choose Atko MFX?

CE EN 845-1

Certified to the European standard for masonry support.

Weld-free

Mostly weld-free: no heat distortion and tighter tolerances.

Made in Belgium

Local production, short lead times and in-house quality control.

Fast installation

Delivered prefab, so installation on site is faster.

Lower environmental impact

Less energy and no welding fumes.
Projects

MFX in practice

All projects

Technical documents

Everything for your project file

Atko brochure

Download

Installation advice MFX masonry supports

Download

Declaration of performance MFX masonry supports

Download

Declaration of performance MFX masonry supports stainless steel

Download
ATKO team member working on the design of MFX masonry supports

Made in Belgium

MFX masonry supports are produced in Belgium and certified to CE EN 845-1. The system is patented.

About Atko
Need help choosing?
Send us your plans. Our team will check which MFX type fits and send you a quote.
Request a quote
Or contact us directly:
+32 3 700 26 60
info@atko.com